Aerial Facade and Rooftop Inspection Across the UAE

Ageing facades and rooftops develop cracks, leaks and hidden moisture long before any damage is visible from the ground, and traditional checks using scaffolding or rope access are slow, costly and disruptive to occupants. Baseera 360 solves this with a fully drone-led facade inspection UAE teams trust and rooftop inspection Dubai owners rely on, reaching every wall, ledge and roofline safely, without scaffolding, cradles or building shutdowns. The result: defects are found earlier, reports arrive faster, and your building stays protected without ever disrupting the people inside it.

Why Baseera 360 Flies Past the Competition

One drone, every elevation, zero disruption. As one of the first dedicated facade inspection UAE providers, Baseera 360 built its entire service around a simple idea: buildings shouldn’t need scaffolding, rope teams, or shutdowns just to be checked for defects. We fly high-zoom and thermal-equipped drones across the full building envelope, walls, glazing, cladding and roof, and turn every pass into a clear, engineer-reviewed condition record.

Most inspection providers rely on manual access methods that are slow, costly and disruptive to tenants. We do things differently. Our rooftop inspection Dubai teams capture the same detail a hands-on survey would, in a fraction of the time, without a single harness leaving the ground crew’s van. It’s a smarter, safer route to the same answer: is this building sound, and where does it need attention?

"The best inspection is the one your tenants never even notice happening."

How Our Drone Facade Inspection Works

Site Assessment & Flight Planning

Every facade inspection UAE project starts with a fully mapped drone flight plan covering each face of the building, from ground-floor podium to rooftop plant areas. Our pilots assess the building's height, glazing type and access constraints before any drone leaves the ground, and we secure all required aviation clearances on your behalf.

Drone Capture of Elevations and Rooftops

Our pilots fly close, controlled passes to capture high-resolution visual footage across every facade elevation and the full rooftop, including parapets, plant rooms and drainage outlets. Sharp, high-zoom imagery is captured alongside infrared data, so nothing hides behind a clean-looking surface.

Thermal + Visual Inspection

We flag and tag each defect as it's found, cracks, spalling, loose cladding, sealant breakdown or displaced panels, and pin every finding to its exact position on the building elevation, so nothing gets lost between survey and repair. Thermal scans run simultaneously to reveal trapped moisture, failing insulation and hidden leaks invisible to the naked eye.

Annotated Report and Repair Priorities

Defects are classified, mapped and reviewed by our team before your report is compiled. Where a defect needs hands-on confirmation, our rope access facade inspection team can verify it up close. You receive a full condition report with annotated photographs of every defect found, thermal imagery highlighting moisture and insulation concerns, a defect location map tied directly to the building's elevations, and a prioritised repair list with severity ratings built for facilities and maintenance teams to act on immediately.

Precision Where It Matters Most

A broken pane isn’t just noted; it’s located. Every instance of cracked or shattered glass identified during a facade inspection UAE survey is mapped to its exact position on the building elevation, so repair teams aren’t left guessing which floor, which grid line or which unit needs attention.

Our scope also extends to missing or damaged ACP (Aluminium Composite Panel) cladding and sealant deterioration on GRC (Glass Reinforced Concrete) joints, both common failure points that quietly compromise a facade’s weatherproofing over time. Where a defect calls for a closer look than aerial imagery alone can provide, we can arrange a targeted intrusive survey at the specified location for hands-on verification.

To support accurate engineering judgement on severity and repair priority, we work from the building’s facade drawings wherever available, cross-referencing captured imagery against the original design intent for a more reliable assessment.

Eyes That Catch What Manual Checks Miss

Cracks and loose panels are only half the story. Many of the most costly defects- trapped moisture, failing insulation, hidden leaks- never show on the surface until the damage is already expensive. That’s why thermal building inspection sits at the heart of every survey we run.

Our infrared cameras read temperature variation across the facade and rooftop membrane, picking up patterns that point straight to trouble:

Water ingress detection behind cladding, render or curtain-wall joints, long before staining appears indoors.

Facade water leakage at window frames, transoms and sealant lines, mapped to the exact joint responsible.

Building water seepage through rooftop membranes, upstands and drainage points that manual checks routinely miss.

Insulation gaps and heat loss that quietly inflate a building's energy bill year after year.

"If you can't see it from the ground, that's exactly where the damage is hiding."

Combining building thermal imaging with high-zoom visual capture means our reports don’t just say something’s wrong; they show precisely where, how serious it is, and what’s likely causing it. It’s thermal facade inspection done properly: methodical, documented and tied to a real location on the building, not a rough estimate.

What You Receive at the End

A drone flight is only useful if the output helps someone make a decision. Every rooftop inspection Dubai and facade survey we deliver comes as a practical, easy-to-use report package:

A full condition report with annotated photographs of every defect found, organised by elevation.
Thermal imagery highlighting moisture, insulation loss and heat-related concerns across the envelope.
A defect location map tied directly to the building's elevations, so repair teams know exactly where to go.
A prioritised repair list with severity ratings, built for facilities and maintenance teams to act on immediately.
An optional Matterport 3D scan of lobbies and common areas.

No guesswork, no vague summaries, just a clear, referenced record your team can hand straight to a contractor or keep on file for compliance and insurance purposes.

Ready to see it in action?

Built for Every Stakeholder on Your Building

Whether you own the asset, manage it day to day, or need to sign off on its safety, our facade inspection UAE service is shaped around what each stakeholder actually needs:

Engineering Consultants

Precise defect data and thermal evidence that strengthens technical assessments and repair specifications.

Facilities Management Companies

A reliable, repeatable building condition survey Dubai teams can schedule into preventive maintenance cycles.

Government & Regulatory Authorities

Documented, compliant inspection records that support public safety obligations and audits.

Developers & Asset/Property Owners

Early warning on defects before they escalate into costly structural or legal issues, protecting long-term asset value. For new builds, pair it with a pre-handover snagging inspection.

Why Property Teams Choose Baseera 360

True full-envelope coverage

every wall and rooftop area captured, not just the accessible sections.

Combined visual and thermal data

defects and hidden moisture issues identified in a single flight.

Fast turnaround

large buildings surveyed in hours, with reports delivered within days, not weeks.

No disruption to occupants

no scaffolding, cradles, shutdowns or blocked walkways.

Specialist experience

genuine high-rise inspection services across towers, hotels, malls and mixed-use assets.

Every UAE facade type covered

from glazing and ACP panels to stone, precast and full cladding inspection UAE work.

Get the Full Picture –

Approvals, Safety & Peace of Mind

Every facade inspection UAE flight we operate follows the relevant civil aviation approvals for Dubai and Abu Dhabi, with permits secured and managed on your behalf before any drone leaves the ground. Our pilots are trained, insured and briefed on each site’s specific access and privacy requirements, so operations stay compliant from planning through to sign-off. Baseera 360 is a GCAA-registered and DCAA-registered operator with the applicable GCAA security clearance.

We also take building occupants’ privacy seriously. Every flight is scoped tightly to the inspection brief, capturing the facade and rooftop under review, not neighbouring properties or private interiors, and all imagery and reports are stored securely.

How We Work, Step by Step

Brief & Scoping

Tell us about the building: its height, facade materials and any known concerns. We confirm the scope, whether that is a full-envelope facade inspection, a rooftop check or both, and agree timings that suit occupants and facilities teams.

Permits & Site Access

We secure the relevant civil aviation approvals and building permissions for Dubai and Abu Dhabi on your behalf. Our pilots are trained, insured and briefed on each site's access and privacy requirements before any drone leaves the ground.

Drone Capture & Thermal Survey

Pilots fly planned, close passes over every elevation and the roof with high-zoom visual and thermal cameras. There is no scaffolding, no cradles and no shutdown, so tenants and visitors carry on as normal while the survey runs.

Defect Review & Mapping

Every finding, from cracks and spalling to sealant breakdown and hidden moisture, is tagged, classified and pinned to its exact position on the building elevation. Our team reviews each one before the report is compiled.

Report & Repair Priorities

You receive an annotated condition report with thermal imagery and a prioritised repair list, delivered within days, not weeks. Where a defect needs hands-on confirmation, our rope access team can verify it up close.

FAQ

Frequently Asked Questions

What does a Baseera 360 facade and rooftop survey actually cover?

Our facade inspection UAE teams capture every building elevation plus the full rooftop, combining high-zoom visual imagery with thermal scanning in a single flight.

Can drone inspections really detect water leaks before they show indoors?

Yes, our thermal cameras are built for water ingress detection, spotting moisture and facade water leakage patterns long before staining or damage appears inside the building.

How is a rooftop inspection different from a facade inspection?

A rooftop inspection Dubai survey focuses on membranes, drainage and plant areas for building water seepage, while facade work covers the vertical walls, glazing and cladding; we typically run both together for full coverage.

How quickly will we get our report after the drone survey?

Most buildings are flown within hours, with your full condition report, thermal imagery and defect map delivered within a few working days.

Do you inspect all facade materials, including cladding and stone?

Yes, our cladding inspection UAE service and wider survey work covers glazing, ACP panels, stone, precast concrete, render and metal facades across the UAE.

Request Your Facade and Rooftop Inspection Today

Share your building’s location, height and facade type, and our team will come back with a scoped proposal within one working day.