See the Fault Before It Sees Your Downtime

A cracked blade. A hidden hotspot. A corroded fitting on a tower you haven’t walked in months. The assets that power the UAE are also the hardest to reach, and every fault that goes unseen becomes downtime, a safety incident, or a bigger repair bill later. Baseera 360 delivers GCAA-approved infrastructure inspection services across solar farms, wind turbines, power lines, oil and gas assets and telecom towers, capturing every visual and thermal fault from the air, with no shutdowns, no scaffolding and no climbers.

From Blind Spots to Full Visibility

Large-scale assets don’t forgive guesswork. A hairline crack on a turbine blade, a hidden hotspot on a solar array, or a corroded fitting on a transmission tower can sit unnoticed for months, until it becomes a costly failure. Baseera 360 provides infrastructure inspection services that put eyes and thermal sensors on every hard-to-reach asset across the UAE, safely and without disrupting operations.

Our pilots and thermographers fly purpose-fitted drones carrying high-resolution zoom and radiometric thermal cameras over solar farms, wind turbines, overhead power lines, oil and gas facilities and telecom towers. Every flight is planned, permitted and flown to capture defects before they escalate, so your maintenance teams act on facts, not assumptions.

if it's tall, remote, live, or dangerous to climb, we can inspect it from the air, faster, safer and with sharper data than traditional methods.

Every Asset. Every Angle. Nothing Missed.

Baseera 360’s infrastructure inspection services are built around the assets that keep the UAE running: energy, power, and communications.

Power Lines, Without the Power Cut

Our transmission tower inspection UAE surveys examine conductors, insulators, cross-arms and fittings along entire line corridors. Using drone power line inspection techniques, we spot corrosion, loose hardware, vegetation encroachment and thermal hotspots, all without a single outage or bucket truck.

Thousands of Panels, One Flight

Thousands of panels, one flight. Our solar farm drone inspection service scans PV arrays with radiometric thermal cameras to flag dead cells, string faults, diode failures and soiling. Every anomaly from our solar panel thermal inspection is mapped to its exact panel location, so repair crews go straight to the fault, no manual walk-downs required.

Blade Inspection, Feet Firmly on the Ground

Rope-access blade checks are slow, weather-dependent and risky. Our wind turbine inspection UAE service captures close-up, high-resolution imagery of each blade to detect leading-edge erosion, cracking, lightning strike damage and surface wear, without a single technician leaving the ground.

Hazard Zones, Inspected From a Safe Distance

Flare stacks, storage tanks, pipe racks and structural steel are inspected using our oil and gas drone inspection methodology, combining visual survey with thermal and gas-leak checks. Hazardous, hot or elevated assets are assessed without shutdowns or scaffolding, keeping your site compliant and your teams safe.

Tower Inspections Without the Climb

We inspect antennas, mounts, cabling runs and structural steelwork on telecom towers without sending climbers up the mast, reducing risk, cost and downtime for network operators and tower companies.

Whatever the asset, our drone asset inspection in the UAE approach follows the same principle: capture more data, in less time, with less risk.

See which asset category fits your site

What We Catch That Others Miss

Every Baseera 360 flight is designed to surface the issues that matter most to asset owners and operators:

The Right Eyes for the Right Fault

Not every fault shows up on camera, and not every camera catches every fault. That’s why Baseera 360 pairs each infrastructure inspection service with the right sensor: high-resolution zoom optics for fine visual detail, and radiometric thermal infrared for temperature-based anomaly detection.

Every thermal image is reviewed by certified thermographers, not left to software alone. Results are geotagged and referenced to the specific tower, panel, span or component, so your engineers can locate and prioritise every finding with confidence.

From Flight Data to Fix List

Deliverable	What You Get
Inspection Report	Located, ranked defects with recommended actions
Visual & Thermal Imagery	Geotagged high-resolution and radiometric data per asset
Fault Mapping	Defects linked to exact tower, panel, span or component
Priority Ratings	Critical / High / Medium / Low, with next-step guidance
Data Delivery	Secure digital package in your preferred format

Ready for a clearer picture of your asset’s condition?

Why Asset Owners Put Their Trust in Us

No downtime, no risk, no compromise. Our infrastructure inspection services are built to protect your assets and your people.

Zero shutdown, zero access-at-height

assets stay live while we fly.

Certified thermal expertise

every anomaly interpreted by trained thermographers, not guesswork.

Precision, not paperwork

geotagged, component-level findings your team can act on immediately.

One inspection partner

from solar panel thermal inspection to transmission

Permits managed end-to-end

GCAA approvals and site clearances handled across all seven emirates.

Built for the Industries Powering the UAE

Renewable energy operators

solar farms and wind assets

Utilities & power transmission companies

grids, substations and line corridors

Oil & gas operators

tanks, stacks and process infrastructure

Telecom operators & tower companies

masts, antennas and network structures

EPC contractors & O&M teams

ongoing asset monitoring and maintenance planning

The Paperwork? Already Handled.

Every Baseera 360 flight operates under valid GCAA approval, with site, facility and airspace clearances arranged on your behalf across every emirate. Data from each infrastructure inspection service is handled under strict confidentiality, essential when working on regulated energy, utility and telecom assets.

From Enquiry to Report: How It Works

Scope the asset

asset type, site location and inspection objectives confirmed.

Plan & permit

fixed proposal issued, GCAA and site approvals arranged.

Fly the survey

visual and thermal drone capture by trained operators.

Interpret the data

thermographic analysis, fault mapping and engineer review.

Deliver the report

prioritised findings and full data package handed over.

FAQ

Your Questions, Answered

What types of assets does Baseera 360 inspect?

We provide infrastructure inspection services for solar farms, wind turbines, overhead power lines, oil and gas facilities, and telecom towers, using both visual and thermal drone technology.

Will my facility need to shut down during the inspection?

No. Our drone asset inspection approach captures live assets in operation, avoiding downtime and removing the need for manual access at height.

What does thermal drone inspection actually detect?

Radiometric thermal imaging identifies electrical hotspots, solar cell faults, and heat or moisture anomalies, all reviewed by trained thermographers for accuracy.

How are inspection findings prioritised?

Every defect is geotagged, mapped to its exact component, and rated Critical, High, Medium or Low, so your team knows what to fix first.

Do you offer drone asset inspection in the UAE across all emirates?

Yes. Baseera 360 operates across all seven emirates and manages GCAA and site permits on your behalf for every project.

Don't Wait for the Fault to Find You

Share your asset type, site location and access details, and our team will respond with a fully scoped proposal for your infrastructure inspection services.